Vacuum Tubing
Accuflow Systems Saint-Gobain Tygon 2375 Tubing, 5/16 in ID, 7/16 in OD
Tygon 2375 tubing is a plasticizer-free, ultra chemical-resistant flexible tubing designed for demanding chemical transfer and fluid-handling applications. The 5/16 in ID, 7/16 in OD construction with a 1/16 in wall balances flexibility and flow while minimizing sorption and particulate buildup.
- Plasticizer-free, non-DEHP formulation for chemical resistance.
- Inner diameter 5/16 in, outer diameter 7/16 in, wall thickness 1/16 in.
- Clear tubing with smooth inner surface to reduce particulate buildup.
- Working pressure 20 psi at 73°F.
- Minimum bend radius 1.25 in.
- Maximum recommended operating temperature 130 °F (54 °C); flexible to -103 °F (-75 °C).
- Excellent resistance to acids, bases, salts, and alcohols; fair resistance to ketones.
- Low sorption to minimize cross-contamination.
- Vacuum rating 29.9 inHg.
- Durometer Shore A 75; tensile strength 1,900 psi; ultimate elongation 850%.
Accuflow Systems Saint-Gobain Versilon Tubing, Plasticizer-Free TPE, 1 in ID
Plasticizer- and oil-free TPE tubing engineered for peristaltic pumps, chemical transfer, and food and beverage lines where chemical resistance, low extractables, and taste neutrality are required.
- Material: plasticizer- and oil-free thermoplastic elastomer (TPE).
- Inner diameter: 1 in.
- Outer diameter: 1-3/8 in.
- Wall thickness: 3/16 in.
- Length: 50 ft.
- Color: clear.
- Temperature range: -108°F to 135°F (-78°C to 57°C).
- Maximum working pressure (at 73°F): 13 psi.
- Vacuum rating (at 73°F): 17 inHg.
- Typical applications: peristaltic pumps, chemical transfer, ink transfer, water purification, food and beverage lines.
Accuflow Systems Saint-Gobain Tygon Tubing, 3/32 x 5/32 in, 50 ft
Saint-Gobain Tygon B-44-3 beverage tubing is a clear, flexible tube formulated for food and beverage transfer and dispensing. It provides non-wetting properties for complete drainage, resists common sanitizing solutions, and meets major food-contact regulations for beverage applications.
- Clear, flexible tubing for beverage transfer and dispensing.
- 3/32 in ID x 5/32 in OD, 50 ft length.
- Wall thickness 1/32 in for consistent flow and fit.
- Shore A 66 hardness for balance of flexibility and durability.
- Maximum recommended operating temperature 165°F (74°C).
- Complies with FDA, NSF-51, NSF-61, 3-A, REACH, and EU 10/2011 where applicable.
- Contains no BPA or phthalates; not listed under California Proposition 65.
- Excellent resistance to sanitizing solutions and easy to flush clean.
Accuflow Systems Saint-Gobain Tygon Tubing, Thermoplastic, 1 in ID, 1-1/4 in OD, 50 ft
Tygon E-3603 thermoplastic tubing provides crystal-clear, medical-grade fluid transfer with a glassy-smooth inner bore to minimize buildup. The tubing is non-oxidizing, non-contaminating, and free of BPA and phthalates. This coil is supplied in 50 ft lengths and is suited for laboratory, diagnostic, and medical fluid-handling applications.
- Clear thermoplastic tubing, 1 in inside diameter, 1-1/4 in outside diameter.
- 1/8 in wall thickness, 50 ft coil length.
- Glassy-smooth inner bore reduces buildup and facilitates visual inspection.
- Non-oxidizing and non-contaminating, BPA- and phthalate-free.
- Maximum working pressure 12 psi at 73°F (23°C); vacuum rating 5 inHg (127 mmHg).
- Minimum bend radius 4-3/4 in; maximum recommended operating temperature 165°F (74°C).
Accuflow Systems Saint-Gobain Tygon Tubing, 3/8 in I.D., 1/2 in O.D.
Tygon E-1000 ultra-soft tubing from Saint-Gobain is a flexible, low-durometer thermoplastic elastomer tubing designed for laboratory dispensing, peristaltic pump use, and handling corrosive chemicals. Supplied in 50 ft lengths, this tubing remains flexible at very low temperatures and minimizes compression resistance for low-torque pump systems.
- Material: Thermoplastic elastomer.
- Inner diameter: 3/8 in (0.375 in).
- Outer diameter: 1/2 in (0.500 in).
- Wall thickness: 1/16 in (0.063 in).
- Length: 50 ft.
- Hardness: 40 Shore A.
- Operating temperature range: -67°F to 125°F (-55°C to 52°C).
- Typical maximum working pressure for this dimension: 7 psi (0.5 bar).
Accuflow Systems Saint-Gobain Tygon Tubing, 3/8 in ID, 50 ft
Saint-Gobain Tygon E-3603 tubing is a clear, flexible thermoplastic tubing engineered for medical, diagnostic, and laboratory fluid transfer. It provides high clarity, low extractables, and resistance to flex-fatigue and abrasion, with a smooth inner bore that minimizes buildup and carryover for reliable, reproducible fluid handling. The 3/8 in inside diameter, 1/2 in outside diameter, and 1/16 in wall thickness are supplied on a 50 ft coil length suitable for bench-scale or instrument installation.
- Clear, flexible thermoplastic construction for visual inspection.
- 3/8 in inside diameter, 1/2 in outside diameter, 1/16 in wall thickness.
- 50 ft (15 m) coil length for instrument runs or bench use.
- Phthalate-free, low extractables formulation to protect sensitive reagents.
- Smooth inner bore reduces buildup and carryover.
- Resistant to flex-fatigue and abrasion for extended service life.
Accuflow Systems Saint-Gobain Tygon Tubing, TPE, 3/8 in ID, 50 ft
Tygon 2375 is a clear, chemical-resistant thermoplastic elastomer (TPE) tubing formulated for aggressive chemicals and low extractables. It is suitable for chemical transfer, cleaning systems, sampling lines, and dispensing applications where chemical resistance and media purity are required. Supplied in 50 ft lengths for equipment and process installations.
- Clear TPE construction with low extractables and low sorption.
- Formulation 2375 provides resistance to acids, bases, ketones, salts, and alcohols.
- Dimensions: 3/8 in ID, 1/2 in OD, 1/16 in wall; 50 ft length.
- Maximum working pressure 17 psi (1.2 bar); vacuum rating 29 inHg.
- Shore A hardness 75; temperature range -103 °F to 130 °F (-75 °C to 54 °C).
- Tensile strength 1900 psi and 850% ultimate elongation for flexibility and durability.
- Complies with FDA CFR 177.1520 and NSF-51 where applicable.
Glass Expansion Contour Flared End PVC Pump Tube 3tag 0.51mm ID Orange/Yellow (PKT 6)
Contour Flared End PVC Pump Tube 3tag 0.51mm ID Orange/Yellow (PKT 6).Tag Colors: Orange/YellowID mm: 0.51Wall Thickness mm: 0.91OD mm: 2.33Overall Length: 455mm (72mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
JR MEDICHEM 1,1'-BINAPHTHALENE -2,2'-DI5G
[1,1'-BINAPHTHALENE]-2,2'-DIAMINE, 6,6'-DIBROMO-, (1R)-, 947337-17-9, MFCD25372911
Perkin Elmer US LLC Solvent to Syringe Pump Tubing - Qty. 1
PerkinElmer carries high quality replacement parts for the Spectrum and OilExpress autosamplers to keep these instruments at optimal performance.
Cole-Parmer Luer to Hose Barb Fitting, Straight Adapter, Animal-Derivative-Free Polypropylene, Cleanroom Packed, Rotating Male Luer Lock x 1/4" ID; 10/Pk
Use these high-quality PVC-free fittings in biomedical, pharmaceutical, electronic, and other critical-use applications. Fittings are manufactured, double bagged, and sealed in an ISO Class 7 cleanroom to ensure that the integrity is not compromised. An ISO Class 7 cleanroom utilizes HEPA filtration systems to maintain air cleanliness levels of less than 10,000 particles of 0.5 m or larger per cubic foot.
Quickly and easily transition from soft tubing to a luer connection using these adapters. Luer fitting is a standardized system comprised of a male taper and a female mating part that provides a leak-free connection. A single barb on one end of the fitting creates a tight seal to keep the tubing in place. Animal-derivative-free polypropylene fittings are radiation stable and resistant to solvents, chemicals, water, strong mineral acids, bases, and other inorganic environments. Not recommended for use with oxidizing agents.